Detecto 210 Spezifikationen PDF herunterladen (Seite 47)

8200-M411-O1 Rev D y 210/215 Installation & Technical 43

ERROR CODES, CONT.

< (HuH?)

UNITS key pressed in an attempt to perform a unit conversion that is not allowed.

CORRECTIVE ACTION: Determine the reason for the error display and take the

appropriate corrective action.

06;9`(no tarE)

NET key pressed with no stored tare weight value.

CORRECTIVE ACTION: Determine the reason for the error display and take the

appropriate corrective action.

6$ (over Capacity)

The load on the scale exceeds the scale capacity plus nine (9) divisions.

CORRECTIVE ACTION: Remove the over capacity load from the scale platform. May

indicate miscalibration.

@6@ (overflow)

The indicator is attempting to display a positive number greater than six (6) digits in length

or a negative number of more than five (5) digits.

CORRECTIVE ACTION: Return to Gross Weight mode and review Tare value. May

indicate miscalibration.

;662- (too big)`

UNITS key pressed in an attempt to perform a unit conversion where the interval would

have been greater than 50.

CORRECTIVE ACTION: Determine the reason for the error display and take the

appropriate corrective action.

'0*;2 (Unstable)

Motion is present when trying to perform a print function.

CORRECTIVE ACTION: Wait for a stable weight display (STABLE annunciator on) before

performing any of this operation.

CALIBRATION SEAL INSTALLATION

If your Model 210/215 Weight Indicator is used in a commercial application it must be tested

and sealed by your local weights and measurements official. The 210/215 is designed to

accept a lead and wire security seal to prevent unauthorized access to the calibration

adjustments. Refer to Figure No. 12 for details on the installation of the seal.

Figure No. 12

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

Keine Kommentare

Detecto 210 Spezifikationen Seite 47